Installing a wood burning stove into new domestic developments can help buildings to achieve compliance with Part L building regulations, by improving the design stage dwelling emissions rate (DER). Unlike open fires, wood burners can efficiently heat homes by minimising energy losses through the chimney, significantly improving environmental performance.

The impact of wood burners

Two notional SAP calculations were completed to demonstrate the impact of a wood burning stove, based on a 100sq m, two-story detached house that uses a gas boiler as its main heating system. The DER of the notional dwelling achieved a 0.1% reduction on the target emission rate (TER), just passing regulations, whilst the same dwelling with the addition of a wood burner (63% efficient) achieved a 5.3% reduction.

The percentage reduction achieved by a wood burning stove can assist in scenarios where a new development does not comply with building regulations at design stage. It can also be used as a means of reducing the reliance on other building elements to meet regulations, such as insulation, air permeability and glazing quality.

Installing a wood burner can also prove useful when refurbishing an existing property, especially when particular building fabrics cannot be easily or cheaply changed.

Why are log burners so efficient?

Wood produces CO2 when it is burned, so why does burning wood perform better than natural gas and coal in SAP calculations? In comparison with fossil fuels, the life cycle of wood is very short, meaning the overall impact on atmospheric CO2 levels is lower, since the tree absorbed CO2 during growth.

Provided the logs used for the burner are sustainably sourced, wood may be seen as a renewable resource that creates no net change in CO2 levels. In a nutshell, when factoring a log burner into SAP calculations, it is assumed that there will be reduced demand on the boiler, meaning less natural gas will be burned to heat the house.

However, it should be noted that despite reducing CO2 emissions, the issue of particulate matter (PM) has been raised, since burning wood produces smoke. This is currently a hot topic after Sadiq Khan’s recent calls to ban wood burning stoves in London due to localised air pollution. It is important to consider impact on air quality when installing a wood burning stove in an urban area, and it is especially important to establish whether the dwelling is situated in a smoke control area that restricts the burning of solid fuels.

The downsides

On paper, installing a wood burning stove is a logical choice when considering regulations and overall environmental impact. However, there are several issues rooted in potential installations, involving physical and economic constraints.

Firstly, the cost. A mid-range wood burning stove costs between £500 and £1000, which is not that expensive when considering the total building cost of a new dwelling. However, the stove also requires a flue to be built in to the dwelling, which can increase construction costs by thousands of pounds, depending on the dwelling.
These costs may be drastically reduced if installation is factored in during the design stage. It is also worth noting that in the case where a dwelling is achieving a high percentage reduction on the TER, money can be saved on insulation and other elements.

Benefits of log burners

When a building is struggling to pass Part L regulations, the installation of a wood burning stove can provide assurance that the building will pass without having to make costly changes at the as built stage of the process, such as the installation of solar PV roof panels.

Wood burners can also increase the attractiveness for potential homeowners and tenants, since their gas bills could be reduced, potentially increasing the value of the property. As well as being an environmentally friendly addition to any home, these factors illustrate how a wood burning stove can be an attractive prospect for house builders and residential developers, alike.

GreenBuild Consult offers full Part L compliance and EPC services for domestic and commercial properties; the company can advise how best to meet regulations and improve energy performance.


Author: Tom King, Trainee Sustainability Consultant

To see the full list of GreenBuild Consult’s services, visit:

For all enquiries, send an email to: [email protected] or call: 0333 355 3610